36W UV LED Nail Lamp – Fast Gel Nail Dryer with USB & Sensor

36W UV LED Nail Lamp

Cure compatible gel nail products at home or as part of your nail-care routine with the 36W UV LED Nail Lamp from Idiello.com. Combining a dual UV/LED light source with 12 lamp beads, three timer settings, infrared sensing and a low-heat mode, this compact lamp provides multiple options for gel manicure and pedicure curing.

The USB-powered design, compact dimensions and approximately 178g weight also make it convenient to store or carry between suitable nail-care setups.

Short Description

36W UV LED Nail Lamp with 12 light beads, infrared sensor, 30s/60s/90s timers, low-heat mode and USB power for gel manicure and pedicure curing.

36W UV LED Gel Curing

The 36W UV LED Nail Lamp provides a stated power rating of 36W and uses a dual UV/LED light source.

It is designed for curing compatible gel nail products rather than conventional air-dry nail polish.

Always check the curing requirements supplied with the specific gel product before use.

Dual UV/LED Light Source

The lamp uses dual UV/LED light technology.

This makes it suitable for gel nail products whose manufacturers specify compatibility with an appropriate UV/LED curing lamp.

Universal compatibility with every gel formulation should not be assumed, as different nail products can have different lamp, wavelength, power and curing-time requirements.

12 Lamp Beads

The supplied specifications confirm 12 lamp beads.

These provide the lamp’s curing light source for compatible gel nail products.

The original description claims 180° coverage and completely even curing, but no beam-distribution or curing-uniformity testing has been supplied, so those performance guarantees should not be stated as confirmed specifications.

30s, 60s & 90s Timer Modes

Choose between three supplied timer options:

• 30 seconds
• 60 seconds
• 90 seconds

These settings provide flexibility when working with different compatible gel nail products.

The correct curing duration should always follow the gel manufacturer’s instructions rather than selecting a time based only on gel thickness.

Low-Heat Mode

A low-heat mode is included according to the supplied specifications.

This provides an additional operating option during gel curing.

However, it should not be described as completely preventing heat or discomfort, as users and gel formulations can respond differently during curing.

Infrared Automatic Sensor

The lamp features an infrared automatic sensing system.

According to the supplied operating instructions, placing a hand inside the lamp activates the light automatically.

This provides a convenient hands-free activation option during appropriate manicure or pedicure routines.

USB Powered

The 36W UV LED Nail Lamp uses a USB power interface.

Connect the lamp using the appropriate USB power arrangement specified by the manufacturer.

The original content mentions laptops, power banks and wall adapters, but no required USB input voltage/current or compatible adapter specification has been supplied. Power-source compatibility should therefore be checked before use.

Compact 17.5 × 14 × 7.5cm Design

The supplied dimensions are:

17.5 × 14 × 7.5 cm

The stated weight is approximately:

178g

This compact size and relatively low weight make the lamp convenient for storage and suitable for nail-care setups where space is limited.

Suitable for Hands & Feet

The supplied product information states that the lamp is designed for both manicure and pedicure applications.

It can therefore be used with compatible gel products applied to:

• Fingernails
• Toenails

Position the hand or foot appropriately so that the nails requiring curing receive suitable exposure.

Gel Manicure Use

The lamp can be incorporated into a compatible gel manicure process.

Prepare the nails and apply the gel according to the cosmetic product manufacturer’s instructions before selecting an appropriate curing cycle.

Repeat the process for additional layers only as directed by the gel system being used.

Gel Pedicure Use

The lamp is also intended for gel pedicure curing.

Make sure the toes are positioned appropriately within the lamp and follow the gel manufacturer’s recommended curing conditions.

The exact internal clearance has not been supplied, so fit can vary.

Not for Regular Nail Polish

This lamp is specifically intended for gel nail products that require compatible UV/LED curing.

Traditional nail polish that dries through air exposure will not necessarily dry faster or cure properly under a UV/LED nail lamp.

Check the nail product label before use.

How to Use

For compatible gel nail products:

1. Connect the lamp to an appropriate USB power source according to the manufacturer’s instructions.
2. Prepare the nails.
3. Apply the compatible gel nail product as directed.
4. Place the hand or foot appropriately inside the lamp.
5. Allow the infrared sensor to activate the lamp where applicable.
6. Select the appropriate 30s, 60s or 90s timer if required.
7. Allow the curing cycle to complete.
8. Remove the hand or foot.
9. Apply additional layers only as directed by the gel manufacturer.
10. Repeat the recommended curing process when necessary.

Always follow the instructions supplied with both the lamp and gel product.

Important Gel Curing Guidance

Different gel nail products can require different curing conditions.

Factors can include:

• Gel formulation
• Layer thickness
• Pigmentation
• Lamp compatibility
• Required exposure time
• Light-source requirements

The lamp provides three timer options, but these should not override the curing instructions supplied with the cosmetic nail product.

Cosmetic Nail Use Only

The lamp is intended for cosmetic gel nail curing.

It is not supplied as a medical or therapeutic device.

Do not use it to diagnose or treat nail, skin or health conditions.

Avoid staring directly into the operating light source and follow the manufacturer’s safety instructions.

ABS Plastic Construction

The supplied housing material is ABS plastic.

No specific ABS grade, heat-resistance specification, impact rating or chemical-resistance certification has been provided.

Clean and handle the lamp according to the manufacturer’s care instructions.

Care & Storage

Before cleaning:

• Disconnect the lamp from power.
• Allow it to cool where necessary.
• Wipe appropriate surfaces carefully.
• Keep the USB connection and electrical components dry.
• Do not immerse the lamp in water.
• Store it in a clean, dry location.

No waterproof rating has been supplied.

Key Features

The supplied product information includes:

• 36W rated power
• Dual UV/LED light source
• 12 lamp beads
• 30-second timer
• 60-second timer
• 90-second timer
• Low-heat mode
• Infrared automatic sensor
• USB power interface
• ABS plastic construction
• 17.5 × 14 × 7.5 cm dimensions
• Approx. 178g weight
• Gel manicure curing
• Gel pedicure curing
• Hands and feet application
• Not intended for regular air-dry polish

Product Specifications

Frequently Asked Questions

What is the 36W UV LED Nail Lamp used for?

It is designed for curing compatible gel nail products during manicure and pedicure routines.

How powerful is the lamp?

The supplied rated power is 36W.

How many lamp beads does it have?

It features 12 lamp beads according to the supplied specifications.

What timer settings are available?

The lamp provides 30-second, 60-second and 90-second timer modes.

Does it have a low-heat mode?

Yes. A low-heat mode is included in the supplied specifications.

Does it have an automatic sensor?

Yes. The lamp features infrared automatic sensing for convenient activation.

How is the lamp powered?

It uses a USB power interface.

Can I use it for both fingernails and toenails?

Yes. The supplied product information identifies it for both manicure and pedicure gel curing.

Does it cure regular nail polish?

No. It is intended for compatible gel products requiring UV/LED curing, not conventional air-dry nail polish.

Does it work with every gel polish?

Universal compatibility should not be assumed. Check the gel manufacturer’s instructions to confirm that its curing requirements are compatible with the lamp.

Is UV/LED curing completely painless?

No. The supplied low-heat mode provides an additional curing option, but a completely pain-free or heat-free experience cannot be guaranteed for every user or gel formulation.

Is it safe for the eyes and skin?

The original description states that it is safe for skin and eyes, but no specific photobiological safety testing, wavelength data or certification was supplied to support an absolute safety claim. Use the device according to the manufacturer’s safety instructions and avoid staring directly into the operating light source.

Package Information

The supplied usage instructions reference a USB cable for connecting the lamp.

However, the complete package contents have not been explicitly specified.

Do not add a wall adapter, manicure tools, storage pouch or other accessories unless their inclusion is confirmed for the exact package.

Delivery Information

Delivery estimates may vary because of customs clearance, public holidays, courier delays or remote delivery locations.