Standing Fan with Remote – 12 Speeds & 3D Oscillation | Idiello

Sunspire Oscillating Standing Fan with Remote Control

Create adjustable indoor airflow with the Sunspire Standing Fan from Idiello.com. This pedestal floor fan combines a DC motor, 12 speed settings, five wind modes and three-dimensional oscillation for flexible air circulation in bedrooms, living rooms, offices and other suitable indoor spaces.

The fan adjusts from approximately 37 to 45 inches in height and includes a remote control and a timer of up to 12 hours. Its stated airflow reach is up to 85ft, while the supplied product information lists a minimum operating noise level of 20dB.

Key Features of the Standing Fan

The Sunspire Standing Fan provides adjustable speed, directional movement and remote operation for everyday indoor air circulation.

Stated Airflow Reach up to 85ft

The supplied product information states an airflow reach of up to 85ft.

This indicates the maximum stated distance under appropriate operating conditions rather than a guaranteed coverage area for every room.

Actual airflow reach may vary according to:

• Selected speed
• Fan position
• Room shape
• Furniture
• Walls and other obstructions
• Surrounding airflow conditions

No tested room-size coverage has been supplied.

3D Automatic Oscillation

The fan provides movement in two directions:

• 120° horizontal oscillation
• 90° vertical oscillation

This combination allows airflow to be directed across different positions and heights within a room.

The exact movement pattern can depend on the selected settings.

12 Adjustable Speed Settings

Choose from 12 speed levels to adjust the amount of airflow according to your preference.

Lower settings can be used when lighter circulation is desired, while higher levels can provide stronger airflow.

Five Wind Modes

The fan includes five operating modes.

These provide different airflow patterns for different situations and comfort preferences.

The individual mode names and exact behaviour were not supplied, so they should not be added unless verified from the final product manual.

DC Motor

The product is equipped with a DC motor.

The supplied information associates the motor with low-noise operation and adjustable airflow.

No wattage or measured power-consumption data was supplied, so the fan should not be assigned a numerical energy-use claim.

Minimum Stated Noise Level of 20dB

The supplied specifications list a minimum stated noise level of 20dB.

This should not be interpreted as meaning the fan operates at 20dB at every speed.

Actual noise can vary according to:

• Speed setting
• Wind mode
• Oscillation
• Installation
• Room acoustics

Adjustable Height from 37 to 45 Inches

The pedestal height can be adjusted between approximately 37 and 45 inches.

This allows airflow to be positioned for different situations, including:

• Sofa seating
• Desk work
• Bedside use
• General room circulation
• Standing areas

Make sure the stand remains securely adjusted before operation.

Remote Control

The included remote control allows supported functions to be adjusted without reaching the fan directly.

This can be useful in:

• Bedrooms
• Offices
• Living rooms
• Study spaces
• Other indoor areas

The remote-control range and exact supported functions were not supplied.

Timer up to 12 Hours

The fan includes a timer that can be set for operation of up to 12 hours.

The exact timer increments were not supplied.

Tool-Free Assembly

The product is described as supporting tool-free assembly.

Follow the supplied assembly instructions and make sure the base, stand and fan components are securely connected before switching the unit on.

Floor-Standing Pedestal Design

The pedestal design places the fan directly on the floor rather than requiring a desk or table.

This can help keep other surfaces available while allowing the fan height and airflow direction to be adjusted.

Product Benefits

• Provides adjustable indoor air circulation
• Offers a stated airflow reach of up to 85ft
• Includes 120° horizontal oscillation
• Includes 90° vertical oscillation
• Provides 12 speed settings
• Includes five wind modes
• Uses a DC motor
• Offers a stated minimum noise level of 20dB
• Adjusts from approximately 37 to 45 inches in height
• Includes remote control
• Provides a timer of up to 12 hours
• Supports tool-free assembly
• Uses a floor-standing pedestal design

Perfect For

This Sunspire Standing Fan can be suitable for:

• Bedrooms
• Living rooms
• Home offices
• Workplaces
• Study areas
• Reading spaces
• Shared indoor areas
• Desk seating
• Sofa seating
• Bedside airflow
• General indoor air circulation
• Users who prefer multiple speed settings

No tested square-foot room coverage has been supplied.

How to Use

1. Assemble the base, stand and fan components according to the product instructions.
2. Confirm that all assembled parts are secure.
3. Place the fan upright on a flat, dry and stable floor.
4. Adjust the height between approximately 37 and 45 inches.
5. Connect the fan to a suitable electrical outlet.
6. Switch the fan on using the on-device controls or remote.
7. Choose one of the 12 speed settings.
8. Select one of the five available wind modes.
9. Activate horizontal or vertical oscillation as required.
10. Use both oscillation directions when the supported 3D movement is desired.
11. Set the timer for up to 12 hours if required.
12. Switch off and disconnect the fan before cleaning, moving or disassembling it.

Using the Oscillation Functions

For wider airflow distribution:

1. Place the fan where its movement is unobstructed.
2. Switch on the fan.
3. Select the desired speed.
4. Activate horizontal oscillation for side-to-side movement.
5. Activate vertical oscillation for upward and downward movement.
6. Use both functions when broader three-dimensional movement is desired.
7. Make sure curtains, clothing and other loose objects remain away from the fan.

The confirmed oscillation ranges are 120° horizontally and 90° vertically.

Adjusting the Fan Height

To change the standing height:

1. Switch off the fan if adjustment requires handling the stand.
2. Adjust the pedestal within the stated 37–45 inch range.
3. Secure the height setting.
4. Check that the fan remains stable.
5. Resume operation.

Do not use the fan if the stand or height-adjustment mechanism is loose.

Product Specifications

Package Includes

The supplied product information confirms:

• 1 × Sunspire Standing Fan
• 1 × Remote Control

The exact number of stand components, fasteners and printed instructions has not been confirmed.

Verify the final package contents before publication.

Assembly and Placement Guidance

• Assemble the fan on a clean, level surface
• Follow the supplied assembly instructions
• Confirm that the base and stand are secure
• Check that the height adjustment is locked correctly
• Place the fan where oscillation is unobstructed
• Leave sufficient clearance around airflow areas
• Keep curtains and clothing away from moving parts
• Keep loose objects away from the grille
• Avoid placing the fan in a walkway
• Move the fan only after switching it off and disconnecting it

Care and Maintenance

• Disconnect the fan before cleaning
• Wipe the exterior with a soft, dry or slightly damp cloth
• Keep dust from accumulating on the grille
• Keep airflow openings unobstructed
• Do not immerse the fan in water
• Do not immerse the remote control
• Keep electrical components dry
• Avoid abrasive cleaners
• Avoid harsh chemicals
• Check the base and assembled connections periodically
• Stop using the fan if parts become loose or damaged
• Store the remote in a clean, dry location

Important Safety Information

• Use the fan indoors on a flat, stable floor
• Keep fingers away from the grille and moving parts
• Keep children and pets supervised around the operating fan
• Do not insert objects through the grille
• Do not use the fan in standing water
• Avoid excessively wet environments
• Disconnect the fan before cleaning or disassembly
• Disconnect it before moving the unit where appropriate
• Keep the power connection away from heated surfaces
• Do not cover the fan
• Do not block the air intake
• Stop using the product if it becomes unstable or damaged

Standing Fan and Stand Fan Terminology

Customers may search for this type of product using terms such as standing fan, stand fan, stand up fan or pedestal fan.

This product is the Sunspire oscillating pedestal floor fan and should be described using its confirmed features:

• 12 speed settings
• Five wind modes
• 120° horizontal oscillation
• 90° vertical oscillation
• Adjustable 37–45 inch height
• Remote control
• Up to 12-hour timer
• DC motor
• Stated airflow reaches up to 85ft

It should not be represented as a Rowenta, BLACK+DECKER or other unrelated branded fan.

Delivery Information

Delivery estimates may vary because of customs clearance, public holidays, courier delays or remote delivery locations.