Smart USB-C Charging Protection with Automatic Physical Disconnect

Smart USB-C Charging Protection with Automatic Physical Disconnect

Protect compatible electronics from unnecessary continued charging with this smart USB-C charging protector from Idiello.com. Designed as an in-line charging accessory, it detects the appropriate full-charge condition and physically disconnects the charging circuit.

With up to 140W passthrough, support for compatible fast-charging protocols and two operating modes, it can be integrated into suitable charging setups for phones, tablets, laptops and other USB-C electronics.

Key Features

Automatic Physical Charging Disconnect

The charging protector monitors the charging process and is designed to activate a physical circuit disconnect when the appropriate full-charge condition is detected.

Instead of storing power or functioning as a charger by itself, the accessory sits within a compatible charging setup and controls the charging connection.

The exact detection method and activation thresholds have not been supplied.

Up to 140W Passthrough

The device supports a stated maximum passthrough power of up to 140W.

Actual charging performance depends on the complete charging setup, including the:

• Charger
• Cable
• Connected device
• Supported charging protocol

The protector cannot make a device accept 140W if the device, charger or cable supports a lower charging rate.

PD and QC Protocol Support

The supplied information lists support for:

• PD 3.1
• PD 3.0
• QC 4+
• QC 3.0

Actual fast-charging performance depends on compatibility across the charger, cable, protector and connected device.

Dual Operating Modes

The charging protector provides two operating modes for different types of compatible electronics.

White LED Mode is intended for compatible screen-based electronics such as:

• Smartphones
• Tablets
• Laptops

Blue LED Mode is intended for compatible non-screen rechargeable electronics such as:

• Power banks
• Electric razors
• Rechargeable mini fans

Select the appropriate mode according to the product instructions and connected device.

Electrical Protection

The supplied product information identifies protection against:

• Over-voltage
• Over-current
• Short circuits

These protections can be retained as supplied features.

However, no specific protection thresholds, certification test results or response times have been provided.

Flame-Retardant Housing

The housing is described as a high-temperature flame-retardant shell.

This supplied material characteristic can be retained, but it should not be expanded into claims such as fireproof, heatproof or guaranteed fire prevention without supporting test data.

Product Benefits

• Automatically controls the charging connection
• Uses physical circuit separation
• Supports up to 140W passthrough
• Supports PD 3.1 and PD 3.0
• Supports QC 4+ and QC 3.0
• Provides two operating modes
• Includes LED mode indication
• Supports compatible USB-C electronics
• Includes over-voltage protection
• Includes over-current protection
• Includes short-circuit protection
• Works with existing compatible charging equipment
• Does not require an integrated power-bank battery

Compatible Applications

The charging protector is intended for compatible USB-C charging setups involving devices such as:

• Smartphones
• Tablets
• Laptops
• Power banks
• Handheld gaming devices
• Electric razors
• Rechargeable mini fans
• Other compatible USB-C electronics

Compatibility and maximum charging performance depend on the connected equipment.

Do not assume compatibility solely because a device has a USB-C connector.

How Does the USB-C Charging Protector Work?

The accessory sits in-line between compatible charging equipment and the device being charged.

During normal operation:

1. Compatible charging power passes through the protector.
2. The system monitors the charging process.
3. It identifies the appropriate full-charge condition.
4. The physical disconnect mechanism activates.
5. The charging circuit is separated.

The exact detection algorithm, current threshold and restart behaviour have not been supplied.

How to Use

1. Confirm that your charger, cable and device are compatible.
2. Connect the USB-C charging protector according to its instructions.
3. Connect the required USB-C charging equipment.
4. Select the appropriate operating mode.
5. Use White LED Mode for supported screen-based devices.
6. Use Blue LED Mode for supported non-screen devices.
7. Allow the connected device to charge normally.
8. The protector is designed to disconnect the charging circuit when the appropriate full-charge condition is detected.
9. Follow the product instructions when restarting or reconnecting charging.

Product Specifications

Important 140W Charging Information

The 140W specification refers to maximum supported passthrough power.

It does not mean every connected device will charge at 140W.

Actual charging power is limited by the lowest compatible capability within the complete charging setup, including the:

• Power adapter
• Charging cable
• Charging protector
• Connected device
• Negotiated charging protocol

Do not advertise 140W as a guaranteed charging speed for every USB-C device.

Is This a Portable Charger?

No.

This product is not a portable charger or power bank.

It does not store electrical energy for later use and cannot independently charge a phone, tablet or laptop.

It requires existing compatible charging equipment.

Is This a USB-C Charger?

The product should also not be confused with a standalone USB-C wall charger.

Its primary purpose is in-line charging control and automatic physical disconnection.

A compatible charger and cable are required for normal operation.

Automatic Charging Protection

The product is designed to disconnect the charging circuit after detecting the appropriate full-charge condition.

However, avoid claiming that it:

• Repairs battery degradation
• Restores lost battery capacity
• Guarantees longer battery lifespan
• Prevents every form of battery damage
• Eliminates all charging heat
• Makes incompatible chargers safe
• Prevents all electrical faults

No battery-health testing or long-term lifespan data has been supplied to establish these outcomes.

Important Compatibility Information

USB-C connector compatibility does not automatically guarantee identical charging performance.

Charging speed and functionality can depend on:

• Charger output
• Cable capability
• Device charging requirements
• Supported charging protocols
• Selected operating mode

Always use charging equipment suitable for the connected device.

Care and Safety

• Keep the accessory dry
• Do not immerse it in water
• Keep connectors clean
• Avoid using damaged cables
• Avoid using damaged chargers
• Do not force USB-C connectors
• Stop using the accessory if its housing becomes damaged
• Keep it away from open flames
• Avoid covering it during charging
• Use compatible charging equipment
• Disconnect the setup if unusual heat, smell or physical damage develops

Important Technical Clarification

The supplied information describes the product as using intelligent recognition to determine when physical disconnection should occur.

However, no detailed information has been supplied regarding:

• Detection algorithm
• Full-charge current threshold
• Voltage threshold
• Disconnect response time
• Automatic restart behaviour
• Standby current after disconnection
• Internal temperature limits

These should not be given numerical values unless verified by the manufacturer.

Package Information

The supplied information confirms the USB-C charging protector, but does not provide a complete verified package list.

Do not automatically list:

• USB-C charging cable
• Wall charger
• Power adapter
• Storage case
• User manual

unless those items are confirmed for the selected package.

Delivery Information

Delivery estimates may vary because of customs clearance, public holidays, courier delays or remote delivery locations.